Researchers in the UK have found that one in six mobiles phones is contaminated with fecal matter while an average phone carries more than 25 000 germs per inch – more than the average toilet seat. With Cyber Clean Home & Office, you can eliminate germs and bacteria that are harbored in between mobile phone keys.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the mobile phone and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Dust and dirt can build up in the shoes, forming an excellent breeding ground for bacteria and fungus. Depending on the level of activity, the quantity of sweat within the shoes can amount to 2 deciliters a day. Humidity combined with bacteria can be the cause of various foot illnesses and foul smelling shoes.
Cyber Clean For Inside Shoes cleaning compound eliminates illness-causing bacteria as well as extracts dirt from within the shoe.
The compound does not leave any residues or humidity within the shoe and it can be used for footwear of all types and materials, including leather shoes and sports shoes.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound inside the shoe and press firmly to reach all gaps and crevices. Press the compound inside the shoe for about 10 seconds then pull it out.
3. Fold the compound on itself to trap dirt and bacteria inside it. Repeat the action as many times as necessary for the shoe to become completely clean.
4. The compound can be reused several times, depending on the amount of dirt absorbed. A color code on the packaging indicates when you should replace the compound.
5. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Dirt and bacteria builds up especially in difficult to reach places, such as between the keys of computer keyboards. Studies have shown that keyboards are usually dirtier than average public toilets. People often snack or have their lunch while on the computer; food crumbs, spilled drinks and dust that settle into the small crevices form an excellent breeding ground for microbes. With Cyber Clean Home & Office, you can eliminate germs as well as remove dirt and dust from the keyboard.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
   
   
2. Place the compound on to the keyboard and press firmly to allow Cyber Clean to enter into all gaps and crevices.
   
   
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
   
   
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Dust and dirt accumulating inside the computer can slow down your system as well as cause overheating. Yet with traditional cleaning solutions it can be very difficult or even impossible to clean the computer on the inside. The Cyber Clean Home & Office cleaning compound leaves no residues and is therefore safe to use even on the most sensitive electronics equipment. Always use a fresh Cyber Clean Home & Office compound when cleaning the computer on the inside.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the area to be cleaned and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Air conditioning systems often have small gaps and crevices that gather dust and dirt – efficiently cleaning them can be problematic. With Cyber Clean Home & Office, you can enter difficult to reach places to remove dirt as well as eliminate bacteria. According to independent studies, Cyber Clean Car decreases the amount of bacteria accumulated in the air-conditioning system by 96% and molds by 97% when applied on the vents.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the air conditioner and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Stereo systems often have several keys as well as ports: dirt, dust and bacteria gather in the small cracks and crevices of the system. Stereo systems are often shared between people, allowing germs to spread from one person to another. With Cyber Clean Home & Office, you can you can remove dirt as well as bacteria harbored in between the keys of the stereo system.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the stereo system and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Cleaning very small objects, such as the individual parts of model railways or other collectibles can be tiresome; yet maintaining them in good condition is every collector’s wish. With Cyber Clean Home & Office adapts to the surface it is applied to, entering even the smallest gaps and crevices to extract dirt and eliminate bacteria. As it leaves no residues, it is completely safe to use on even the most sensitive surfaces.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the surface to be cleaned and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Tools and accessories often have hard to reach gaps and crevices that can harbor not only dirt but also bacteria. With Cyber Clean Home & Office adapts to the surface it is applied to, entering even the smallest gaps and crevices to extract dirt and eliminate bacteria. As it leaves no residues, it is completely safe to use on even the most sensitive surfaces.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the surface to be cleaned and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Remote controls usually have several keys and dials – bacteria and germs are easily harbored in between these keys. Remote controls are usually shared with other people; this increased the risk of germs and bacteria spreading. With Cyber Clean Home & Office, you can extract dirt as well as the bacteria harbored in between the keys of the remote.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the remote control and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Dust and dirt can build up in the shoes, forming an excellent breeding ground for bacteria and fungus. Depending on the level of activity, the quantity of sweat within the shoes can amount to 2 deciliters a day. Especially for sports shoes, this can be even moe. Humidity combined with bacteria can be the cause of various foot illnesses and foul smelling shoes.
Cyber Clean For Inside Shoes cleaning compound eliminates illness-causing bacteria as well as extracts dirt from within the shoe.
The compound does not leave any residues or humidity within the shoe and it can be used for footwear of all types and materials.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound inside the shoe and press firmly to reach all gaps and crevices. Press the compound inside the shoe for about 10 seconds then pull it out.
3. Fold the compound on itself to trap dirt and bacteria inside it. Repeat the action as many times as necessary for the shoe to become completely clean.
4. The compound can be reused several times, depending on the amount of dirt absorbed. A color code on the packaging indicates when you should replace the compound.
5. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Food crumbs, dirt and dust accumulate in the small gaps and crevices of gaming controllers and keyboards. This can affect the performance of the equipment as well as make it easier for germs to spread, especially if the equipment is shared. For more information, read our article on how to take care of your gaming equipment.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the gaming controller or keyboard and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Dust, dirt and hair accumulate within the hair dryer during use and storage. This can cause the hair dryer to overheat – with Cyber Clean Home & Office, you can extract dust particles and dirt from the small gaps and crevices of the dryer.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the hair dryer and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Electric shavers gather not only dust and hair but also bacteria. This can affect the performance of the equipment as well as cause skin irritations. With Cyber Clean Home & Office, you can remove dirt as well as bacteria harbored within the shaver.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the shaver and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.

Cyber Clean Screen Cleaning Solutions includes products for cleaning and disinfecting screens of different sizes. HomeScreen-Pro is ideal for cleaning large TV screens to allow for a clear, dust and stain-free image. Its alcohol-free, antiseptic cleaning solution and hydrophilic, multi-layer fabric ensures surfaces are cleaned as well as disinfected, with no residues left behind.

1. Hold a distance of 10–15 centimeters and spray 2–4 times on the surface of the screen
2. Flip around and use the hydrophilic fabric on the backside of the device to wipe across the screen until the surface is completely dry.

Toys are often shared between children in the family, or with other children on the playground or in kindergartens. Germs can live on the surface of toys and be transferred onto children – safely disinfecting and cleaning toys is therefore essential to prevent illnesses from spreading. With Cyber Clean Home & Office is made mainly of natural ingredients, making it safe to use on children’s toys. It leaves no residues on the surfaces it is applied to and can therefore be used even on toys containing electronic parts. Cyber Clean is not intended for cleaning plush toys.

1. Remove the compound from its packaging and knead it for about 10 seconds. This allows the compound to adapt to the pH value of your skin. Use only with dry hands.
2. Place the compound on to the surface to be cleaned and press firmly to allow Cyber Clean to enter into all gaps and crevices.
3. Pull the compound out. Fold the compound to trap dirt and bacteria inside the membrane system. Repeat cleaning action if necessary.
4. Put the compound back into its re-sealable packaging and close it carefully to ensure the compound remains fresh. Store the product in a cool and dry place, away from direct sunlight.